These guys have taken a while to finish with some of the minis built around a year ago and the first painting steps taken during summer, but they are finally finished. As I said a few posts ago I had a mishap with varnish leading to all of the minis having paint stripped and redone. Suffice to say I've learned my lesson and won't lazy out by using a spray can if I have the airbrush available and using spray varnish outside after rainy weather is definitely not a good idea.
My comeback into 40k started about a year and a half ago when I dug out some old plastics that I had lying around from early 00's and found my old bits box. I like kitbashing stuff and slowly found myself with an assortment of miniatures that didn't really have any use for gaming for me so probably wouldn't get painted. I remember loving 40k as a youth playing tons with my IG and later on Death Guard armies. So I figured it might be a good idea to build a small army to kind of have a target to strive for. Sometime late last year and early this year I put some smallish guidelines for myself about what I wanted to do with the force and what to aim for when putting together models.
I don't know what it is about Chaos that always pulls me in, but once again I couldn't resist it's lure. What I originally put together was mostly renegade guard and some mutants with a few Chaos Space Marines thrown in for good measure. However I figured that I'm not going to be painting a few hundred renegade guardsmen to get into gaming so I decided to build a smaller CSM force first to get into gaming faster. Choosing my legion wasn't going to be easy though. I had a reasonably sized Death Guard force previously, but it's been sold long time again. I did have an urge to build a new one with the modelling opportunities, but decided otherwise as I've done multiple Nurgle armies over the years and always seemed to lean towards the loving caress of Papa Nurgle. Khorne worshippers were out of the question as I find them a bit dull and I didn't fancy painting all that red armor. After days of research I finally decided Chaos Undivided is the way to go and what better Legion to go for than the infamous Alpha Legion.
The Command team with a Power Sword and combiplasma wielding Sergeant, two Plasma gunners a standard bearer and the squads very own Rambo going at it with dual-wielded pistols.
With Alpha Legion's mysterious past and and slight doubts about their allegiances even after the Heresy offered a nice backstory to pick from. The fact that they are operating as small cells outside of the Eye of Terror would open some possibilities to differ from the normal add spikes to chaosify approach that is predominant with the official Chaos miniatures line. After all the legionaries would have to somewhat blend in to achieve their tasks and aid in subterfuge.
With the Legion chosen I set about choosing some design guidelines to have somewhat of a plan regarding my building process.
- No spikes!
- Every miniature must contain parts from at least two different kits or have some clear conversion done to them
- Equipment from different eras should be used when possible to achieve a look of a veteran unit that has kept whatever equipment worked best for them.
- Every model must have something distinctively chaotic equipment
- Regular Space Marine backpacks instead of the weird looking Chaos ones.
Painting scheme wise I went for a look similar to the one in the mid 90s Codex with a blue base colour and light green highlights. The base shades were painted with an airbrush and light green edge highlights were done with a brush. With details being picked out I decided to try Tamiya Panel Line Accent to define the edges. Not sure if I'm totally sold on the product as results were a bit mixed. On areas of the newer kits which had sharp detail it worked great flowing into creases and corners to make them pop out, but on the older ones with soft detail like the Chaos Space Marine plastics it had a tendency to just run everywhere and had to be cleaned up using mineral spirits. A thicker satin varnish layer would also be required to help the wash flow and make cleaning up easier. Now I had practically no varnish in some harder to reach areas as I only did a thin coat to protect the minis in between.
The regular Joes of the squad.
I finished painting them a few weeks back, but only got around to basing them now as I had a few days of from work. Basic rubble themed basing with some tear plates and discarded imperial equipment thrown in to spice them up. Plenty of different coloured pigments were thrown in to add variety to the otherwise monotone finish.
With them out of the way I have the squads Rhino up next. Though with the speed I've been painting these guys it will be 2018-19 before I have a whole army together so don't hold your breath.
In other news it's the Finnish independence day today so a busy evening ahead filled with the traditional spectacle where we watch our president shake the hands of thousands of guests at the Presidential Independence day party. Plenty of judgment will be dealt out with most of the nation tuning in and admiring and berating the dress choices of guests. At least the afternoon papers will have plenty to write about for the next few days.
With Putin in charge of our neighbouring country our President has also had to step up his game with photoshoots. Being a classy guy he at least has his shirt on unlike Putin :)
0 Yorumlar